Viewing inquiries for 07-1W5204

Submit new inquiry for this project

Inquiry #1: The following project had bid prior ,what was the reason for not accepting the bids that were prior submitted?
Inquiry submitted 04/13/2014

Response #1:The Bids previously submitted for this Contract expired after 30 days, therefore re-advertisement was warranted.
Response posted 04/14/2014

Inquiry #2: The bidder extended the bid is there reason the extension was not acknowledge be the Agency?
Caltrans had requested the extension due to time of the first award to Kanan Construction Inc..

What was the reason for the award not being granted to Kanan Construction Inc. prior to 30 days?

Are there changes to the plans and specifications or are the plans exactly what was advertised prior?

Inquiry submitted 04/18/2014

Response #1:The Department had multiple bid protests which kept us from awarding the contract within 30 days. Please review plans and specs for new bid.
Response posted 04/23/2014

Inquiry #3: Pre-engineered metal trusses are shown on sheet ST1-3 & ST1-6, are truss calculations to be provide by manufacturer with shop drawing as built?

Inquiry submitted 04/22/2014

Response #1:Yes, calculations and engineer's seal are required for shop drawings.
Refer to "5-1.23B(2) Shop drawings" of the Standard Specs and 99-05120A(3) Submittals of the Special Provisions.

Response posted 04/23/2014

The information provided in the responses to bidder inquiries is not a waiver of Section 2-1.07, “JOB SITE AND DOCUMENT EXAMINATION” of the Standard Specifications or any other provision of the contract, nor to excuse the contractor from full compliance with the contract. Bidders are cautioned that subsequent responses or contract addenda may change a previous response.